The Difference of Impact Strength in Acrylic Resin Self-Cured with the Addition of Zirconium Dioxide (ZrO2) Nanoparticles

Authors

  • Annete Juwita Sarjana Kedokteran Gigi Fakultas Kedokteran Gigi Universitas Hang Tuah
  • Widaningsih Prostodonsia Fakultas Kedokteran Gigi Universitas Hang Tuah
  • Puguh Bayu Prabowo Ilmu Material dan Teknologi Kedokteran Gigi Fakultas Kedokteran Gigi Universitas Hang Tuah

Keywords:

Self cured acrylic resin, zirconium dioxide, impact strength

Abstract

Background: Self-cured acrylic resin is a material used for repairing broken and fractured dentures. Zirconium dioxide (ZrO2) is a reinforcing material that is being developed as an additive to the acrylic resin. Purpose: to determine the effect of zirconium dioxide (ZrO2) addition on self-cured acrylic resin on impact strength. Material and Methods: This study was a true experimental laboratory study with the design of a post-test only control group design, using 24 pieces of self-cured acrylic resin measuring 65 x 10 x 2.5 mm divided into 4 groups with and without zirconium addition dioxide (ZrO2) nanoparticles. Zirconium dioxide (ZrO2) nanoparticles were silanized first by mixing the silane coupling agent. Furthermore, the impact strength was tested on the plate. The data obtained were analyzed using the One Way ANOVA test. Results: there were significant differences in the impact strength between the groups with a significance value of 0,000 (p <0.05). Conclusion: there was a difference in the increase of impact strength in acrylic resin self-cured with the addition of ZrO2 nanoparticles concentrations of 3%, 5%, and 7%.

Downloads

Download data is not yet available.

References

Dama C, Soelioangan S, Tumewu E. Pengaruh Perendaman Plat Resin Akrilik dalam Ekstrak Kayu Manis (Cinnamomum burmanii) terhadap Jumlah Blastospora Candida Albicans. Jurnal e-Gigi (eG). 2013;1(2):5-1.

Anusavice KJ, Shen C, dan Rawls HR. Phillips Science of Dental Material, 12th ed. Philadelphia: W.B. Saunders Co.;2013. p. 43-724.

Craig GR. Dental Materials: Propeties and Manipulation. 8th Ed; 2004. p. 186-200.

Anusavice KJ. Phillips’ Science of Dental Materials. 10th Ed. New Delhi: Elvesier; 2004. p. 9-75, 85-92,62-155, 6-164, 6-734.

Hatrick CD, Eakle WS, Bird WF. Dental Material Clinical Applications for Dental Assistants and Dental Hygienist, 2nd ed. Missouri: Elsevier, Saunders; 2011. p. 23-217.

Irfandy, Dharmautama M, Damayanti I. Stabilitas Warna Basis Akrilik Gigi Tiruan Lepasan setelah Pembersihan dengan Ekstrak dan Infusa Bunga Rosella. Journal of Dentomaxillofacial. 2014; 13(1):38-42.

Budiharjo A, Wahyuningtyas E, Sugiatno E. Pengaruh Lama Pemanasan Pasca Polimerisasi dengan Microwave terhadap Monomer Sisa dan Kekuatan Transversa pada Reparasi Plat Gigi Tiruan Resin Akrilik. J Ked Gi. 2014;5(2): 13-1.

Agarwal M, Nayak A, Hallikerimath RB. A Study to Evaluate the Transverse Strength of Repaired Acrylic Denture Resins with Conventional Heat-Cured, Autopolymerizing and Microwave-Cured Resins: An in vitro study. J Indian Prosthodont Soc. 2008;8: 41-36.

Arundati R, Patil NP. An Investigation into the Transverse and Impact Strength of a New Indegenious High-Impact Denture Base Resin, DPI-tuff and its Comparison with Most Commonly Used Two Denture Base Resins. J Indian Prothodont Soc. 2006;6(3):133-8.

Powers JM, Wataha JC. Dental Materials Propertiesand Manipulation. 9th Ed. Missouri: Mosby Elsevier;2008. p. 93-286, 299-300.

Manappalil JJ. Basic Dental Materials. 2nd Ed. India: Jaypee Brothers Medical Pub Ltd.;2010. p. 399-400.

Noort RV. Introduction to Dental Materials. 3rd Ed. China : Mosby Elseveir; 2007. p. 211-214.

Ahmed MA, Ebrahim MI. Effect of Zirconium Oxide Nano-Fillers Addition on the Flexural Strength, Fracture Toughness, and Hardness of Heat-Polymerized Acrylic Resin. World Journal of Nano Science and Engineering. 2014;4:57-50.

Dahar E, Handayani S. Pengaruh Penambahan Zirkonium Oksida pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas terhadap Kekuatan Impak dan Transversal. Jurnal Ilmiah PANNMED. 2017;12(2): 194-9.

Dahar E, Laily AN. Pengaruh Penambahan Zirkonium Oksida dan Serat Kaca pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas terhadap Kekuatan Impak dan Transversal. Jurnal Ilmiah PANNMED. 2017;12(2):160-154.

Ihab NS, Moudhaffar MA. Evaluation the Effect of Modified Nano-fillers Addition on Some Properties of Heat Cured Acrylic Denture Base Material. J Bagh College Dent. 2011;23(3):29-23.

Hameed HK, Rahman HA. The effect of Addition Nano Particle ZrO2 on Some Properties of Autoclave Processed Heat Cure Acrylic Denture Base Material. J Bagh College Dent. 2015;27(1): 39-32.

Alla RK, Sajjan S, Alluri VR. Influence of Fiber Reinforcement on the Properties of Denture Base Resins. Journal of Biometerials and Nanobiotechnology. 2013;4: 91-7.

Salman TA, Khalaf HA. The Influence of Adding of Modified ZrO2-TiO2 Nanoparticels on Certain Physical and Mechanical Properties of Heat Polymerized Acrylics Resin. J Bagh College Dent. 2015;27(3):33-9.

Ergun G, Sahin Z, Ataol AS. The Effects of Adding Various Ratios of Zirconium Oxide Nanoparticels to Poly(Methyl Methacrylate) on Physical and Mechanical Properties. Journal of Oral Science. 2018;60(2): 304-15.

Nindha TGT. Biomimetik, Biomaterial, Teknologi Manufaktur Printing 3D. Diktat Teknik Mesin Denpasar: Universitas Udayana. 2017; p.635.

Ferasima R. Pengaruh Penambahan Serat Kaca dan Serat Polietilen terhadap Kekuatan Impak dan Transversal pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas. IDJ. 2013;2(1): 36-27.

Gad MM, Rahoma A, Thobity AM , ArRejaie AS. Influence of Incorporation of ZrO2 nanoparticles on the Repair Strength of Polymethyl Methacrylate Denture Base. International Journal of Nanomedicine. 2016;11:5633-43.

Downloads

Published

2021-08-12

How to Cite

Annete Juwita, Widaningsih, & Puguh Bayu Prabowo. (2021). The Difference of Impact Strength in Acrylic Resin Self-Cured with the Addition of Zirconium Dioxide (ZrO2) Nanoparticles. DENTA JURNAL KEDOKTERAN GIGI, 12(1), 51–59. Retrieved from https://journal-denta.hangtuah.ac.id/index.php/jurnal/article/view/75

Issue

Section

Articles